Robopac ROTOPLAT 108-308-508-708 Скачать руководство пользователя страница 99

Страница: 99 / 121

INFORMATION ABOUT THE USE

ENG

6.19. CYCLE START AND STOP

Proceed as follows.

Place the pallet on the rotary table and move the loading device away.

Fasten the film to the striker bracket (never to the gripper).

Press the "Cycle Start" button (A).

The machine completes the cycle and stops automatically.

Cut the film (If necessary).

Remove the pallet and position a new pallet to start a new cycle.

Important

To temporarily suspend the cycle, press th

e “Cycle stop” button (

B).

Press the "Cycle Start" button (A) to restart it.

Rotoplat LP 308-508-708

Rotoplat TP3 308-508-708

6.20. PRESSER HEIGHT CHANGE

Presser unit can be supplied with pneumatic (stroke 800) or mechanical cylinder version.

The illustrations show the machine with the presser unit in the available versions.

See tables to find the minimum height of the pallet to be wrapped in accordance with the version of the

presser installed on the machine.

Caution - warning

For “LP” versions, remove the load after the wrapping cycle

Содержание ROTOPLAT 108-308-508-708


























































































































Результаты поиска

Содержание ROTOPLAT 108-308-508-708

Отзывы:

Похожие инструкции для ROTOPLAT 108-308-508-708

Бренды по названию

Популярные бренды

Robopac ROTOPLAT 108-308-508-708, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание ROTOPLAT 108-308-508-708

Отзывы:

Похожие инструкции для ROTOPLAT 108-308-508-708

Бренды по названию

Популярные бренды