Chapter 6
INFORMATION ON USE
-
31
-
English
C62
4151
100.fm
ID
M
On “
FRD
”-type carriages, to allow for
the film to be positioned between the
rollers and be unwrapped, the brake
shall be released by turning the hand-
wheel
(A)
to "
0
".
To facilitate the film positioning, the
upper part of the stretch rollers is
equipped with a truncated double-cone
surface.
6.16. BATTERY RECHARGE
Routine recharge
Perform this operation when only
the red battery state indicator
light remains on
(A)
.
Message E90 (battery charge
alarm) appears on the digital dis-
play and remains on the display
for 15 minutes.
Afterwards a series of long sirens
sound for another 15 minutes. After this period the ma-
chine automatically turns off.
Information
The battery is subject to a self-discharge process
that may compromise its good operations in the
long run. Completely recharge the battery every 2
months in the event of periods of prolonged
disuse. For longer battery life the machine will
automatically switch off when the charge reaches
23,7 V. Use the "Output data" key (see § 6.6. key 4),
to check this value and recharge before the
machine stops.
Proceed as indicated.
1 -Lift the battery cover
(B)
.
2 -Insert the plug into a socket.
The LEDs "
power supply
"
(C)
and
"
Battery present
"
(D)
indicate the
ongoing connection of both power
supply and battery.
The LED "
Charge finished
"
(E)
flashes during final charge (approx
3 h). Once charge has been
completed, the LED remains lit.
3 -Remove the plug and close the
battery cover.
A
IDM-24126602800.tif
IDM-24126603200.tif
A
IDM-24126602902.tif
B
C
E
D
F
G
