RoboJet Wiso, Руководство пользователя

Страница: 33 / 42

Robo
Jet
Instrukcja obsługi | User Manual RoboJet Wiso
33
REMOTE CONTROL
1. Directions button
2. START/STOP button
3. Cleaning button of driving treads
4. Cleaning mode of the right part of the
window
5.
Cleaning mode N
6. Cleaning mode Z
7. Cleaning of stubborn dirt
8. Undefined
PAIRING THE REMOTE CONTROL
1. Turn on the RoboJet Wiso with the main switch located on the bottom of the
device.
2. Wait for the LED to turn solid blue.
3. Press and hold at the same time:
a. Bottom device bumper on the left. b.
b. Start / Stop button on the device holder.
IMPORTANT : When the device's LED begins to flash red-blue*
* If the LED on the robot turns solid red and the robot beeps, the procedure must be repeated
from point 1, taking care to keep the lower bumper on the left and the start / stop button
pressed for a longer period of time. Press the "Cleaning mode Z" button and the "persistent dirt
cleaning" button on the remote control at the same time until the robot beeps and the LED
lights up in blue.
4. Turn off the device by holding the start / stop button on the robot's holder.
5. Turn off and turn on the device with the main button on the bottom of the
robot.