3
Installation Instructions
MOUNTING OF THE V-FLAP
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body. The
images only show an example of how to mount the V-flap, because the outlet may vary according to different
models and configurations.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6
• The pin 3 should be top oriented
• The axis 4 should be inserted into the holes 5 on the body
• Repeat all the operations for the 2nd half-part
INSTALLATION
•
If you have an outlet to the outside, your cooker hood can be connected as below picture by means of
an extraction duct (enamel, aluminum, flexible pipe, or non-flammable material with an interior
diameter of 150mm)
•
Before installation, turn the unit off and unplug it from the outlet.