If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
36
Operating your radio - FM
1. Carefully extend the wire aerial and press the
On/Off
button to switch
on your clock radio.
2. Press
the
Band
button as needed to select the FM mode display.
3. Press and hold the
Tuning Up
button. The displayed frequency will
increase. Your radio will scan up the FM band from the currently
displayed frequency and will stop scanning when it fi nds a station of
suffi cient strength.
4. The display will show the frequency of the signal which has been
found. If RDS information is available, after a few seconds the display
will show the radio station name.
If you only hear hiss or interference, simply press the
Tuning Up
buttton
to scan further. Your radio may have found a spurious interference
signal.
5. To fi nd more FM stations press the
Tuning Up
button to
repeat the
scan operation. To scan down in frequency, press and hold the
Tuning
Down
button
. Your radio will scan down the FM band from the currently
displayed frequency and will stop scanning when it fi nds a signal of
suffi cient strength.
6. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
7. Use
the
Volume
buttons to adjust the sound level as needed.
1
2
5
3-5
7
7
FM Radio