65
FM Radio
Operating your radio in FM mode
1. Carefully extend the telescopic aerial and press the
On/Standby
button to
switch on your radio.
2. Press
the
Radio
button as needed to select
FM radio
mode.
3. Press the
Menu Up
button (on the radio) or the
Right
button (on the remote
control) and then the
Auto
button on the remote control.
The displayed
frequency will increase. Your radio will scan up the FM band from the currently
displayed frequency and will stop scanning when it fi nds a station of suffi cient
strength.
4. The display will show the frequency of the signal which has been found. If
RDS information is available, after a few seconds the display will show the
radio station name.
If you only hear hiss or interference, simply press the
Auto
button to scan
further. Your radio may have found a spurious interference signal.
5. To fi nd more FM stations press the the
Auto
button (on the remote control)
to
repeat the scan operation. To scan down in frequency, press the
Menu
Down
button (on the radio)
or the
Left
button (on the remote control)
and then
the
Auto
button
.
Your radio will scan down the FM band from the currently
displayed frequency and will stop scanning when it fi nds a signal of suffi cient
strength.
6. Alternatively press and hold the
Menu Up
on the radio to scan up in frequency
or the
Menu Down
button to scan down the FM band. Alternatively press
and hold the
Left
or
Right
buttons on the remote control.
7. When the end of the waveband is reached your radio will recommence tuning
from the opposite end of the waveband. Use the
Volume
buttons to adjust
the sound level as needed.
2
5,6
3-6
3-5
3-6
5,6