
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
88
Display and Audio
Auxiliary input socket
A 3.5mm stereo
Auxiliary Input
socket located on the rear of your radio
is provided for connecting the audio signal from an external audio source
such as an iPod, MP3 or CD player.
1. Connect a stereo lead from the headphone output of your iPod, MP3
or CD player to the Aux In socket located at the rear of the radio.
Typically this lead will have a 3.5mm stereo plug at both ends.
2. Switch on your radio.
3. Press
the
Mode
button until
AUX in
mode is shown on the display.
4. Press the 'play' on the connected audio device. Use the volume control
on the connected device to adjust the volume from the radio.
Note:
The radio's volume control will have no effect in Aux In mode.
5. After use, disconnect your player in order to listen to your radio
conventionally. Either switch off your radio or select an alternative
operating mode using the
Mode
button.
Note:
If you do not disconnect your player when you switch to other modes,
you may
fi
nd that the audio volume from the radio is reduced, or that you
can hear the player and the radio at the same time.
Note:
If the radio is in Auxiliary input mode with no input signal being
applied for more than 15 minutes then it will automatically switch to the
standby mode. The LCD will revert to the standby mode clock display. To
use the radio again, simply press the On/Standby button to switch it on.
3
1
Содержание Stream 205
Страница 102: ...101 Notes ...