5
Operating your clock radio
1. Press
the
On / Standby button
to switch on your clock radio. The
display will show "TUNING" for a few seconds.
When fi rst switched on, the radio will be in DAB mode. After each use
the radio will remember the mode used and then switch on in that
mode the next time that it is used.
2. If the clock radio has been used before, the last used station will be
selected.
3. If this is the fi rst time that the clock radio has been used, then the fi rst
station in the list of stations found during scanning will be played. The
display will show the station name on the display.
4. If no signals are found then "OFF AIR" will be displayed and it may
be necessary to relocate your clock radio to a position giving better
reception. You should then carry out a scan to fi nd stations as described
on page 9.
•
Your clock radio has an indicator
on the display to indicate the
strength of the DAB radio signal being received.
Note:
When fi rst switched on, the radio will set the volume to a moderately
high level, in case the broadcast is very quiet. After you have set the volume
using the
Volume Up
or
Down
buttons, the radio will remember the setting
that you have applied for the next time that it is used.
1
Содержание DreamTime
Страница 4: ...3 Controls rear 15 Loudspeaker 16 Headphone socket 17 DAB FM wire aerial 15 17 16...
Страница 34: ...33 Notes...
