If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
4. Adjust the volume by rotating the
Volume control.
3. Tune in to the desired station by rotating the
Tuning control.
The station frequency is indicated by the
LED dial pointer.
The
Wire aerial
located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW and LW reception there is a built-in ferrite aerial. Rotate
your clock radio to the position giving best reception.
2. Select the required waveband using the
Waveband selector
switch.
Listening to the Radio
1. Turn on the radio by sliding the
Function switch
to the 'On '
position. The
LED dial pointer
will light up indicating that the
radio is switched on.
5. The radio can be switched off by sliding the
Function switch
to
the 'Off ' position.
