EN
EN - 31 -
1. Firmware available on www.robertjuliat.com/followspots/SULLY_1156
2. Download and unzip the file
There are 4 files:
- Firmware (.upd2 format)
- Firmware History
- Update Procedure
- User Manual from firmware V3.0
3. Switch on the unit
4.
Connect Network from computer to the unit
5. Open a web browser (Internet Explorer, Firefox, Chrome…)
6. Enter the URL address to connect to the web interface (
see 5.1
)
7. Upload your firmware file (.upd2) in the "Update firmware"
section and then click on 'Submit firmware"
6.5 Factory defaults
6.5.1 Modes
6.5.2 Control
T
If IP address unknown (due to a previous modification), IP address can be read from RDM protocol or
a
hard reset
must be done:
Mode
Description
Restart
Software reset – all user parameters are kept
Factory defaults
Set all user parameters to factory default value
While holding down the
reset
button with
a paper clip, connect the unit to power and
continue to hold the reset button until the 3
status light turn green.
The system is then ready for setup.
Set to factory defaults /
reset through web interface (Home page)
Set to factory defaults /
reset through RDM protocol
RDM
compatible
device
Reset
