ROBEL 13.45SKS Vers. 01 Скачать руководство пользователя страница 58

Страница: 58 / 83

6. Commissioning

CAUTION

Risk of injury”

If you just let go of the starter handle after the

start-up process, it can cause injury to the

fingers, hands and arms.

►

Do not allow the starter handle to snap back

against the engine but move it back gently..

NOTICE

Risk of damage to the recoil starter!
If you just let go of the starter handle after the start-up pro-

cess it can get damaged.

►

Do not allow the starter handle to snap back against the

engine but move it back gently.

3. Pull the starter handle (1) gently several times until the

engine briefly fires.

Fig. 56: Pull starter handle

4. Set the throttle lever to “Full throttle” and vigorously pull

the starter handle all the way.

The engine starts.

Move starter handle back gently.

A low speed setting produces less

starting fumes!

Содержание 13.45SKS Vers. 01




















































































Результаты поиска

Содержание 13.45SKS Vers. 01

Отзывы:

ROBEL 13.45SKS Vers. 01, Руководство по эксплуатации, Страница: 58 / 83

Результаты поиска

Содержание 13.45SKS Vers. 01

Отзывы: