Page: 5
deterioration of the surface that could adversely affect the life of the
appliance and possibly result in a hazardous situation.
MICROWAVE SAFETY WARNINGS:
If the door or door seals, door hinges or any part of the machine is damaged,
the oven must not be operated until it has been repaired by an authorised
person.
Do not place any object between the oven front face and the door, or allow
soil or cleaning residue to accumulate on sealing surfaces
Do not attempt to operate this appliance with the door open.
Do not tamper with interlock safety switches
This product should not be repaired by anyone other than trained service
personnel.
CLEANING, CARE & MAINTENANCE
IMPORTANT
: Before cleaning or maintenance commences, ensure the
microwave is disconnected from power and has cooled down.
Toxic cleaners should be avoided when cleaning the inside of the Microwave
as they may contact food.
Caustic cleaners should always be avoided, as they may damage
components inside and outside the unit.
This unit is not suitable for cleaning with the use of a water jet or immersion.
The door frame, seal and parts nearby must be cleaned carefully with a
damp cloth when they are dirty.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven door glass since they can scratch the surface, causing damage to the
door or shielding mesh within.
CAUTION: Do not wipe plastic and painted sections of the oven with bleach,
thinners or other cleaning agents, as this may cause these parts to dissolve
or change shape.
If the supply cord is damaged it must be replaced by a cord set supplied by
Roband. Internal maintenance should only be performed by a Roband
appointed service agent or similarly qualified person in order to avoid a
hazard.
Cleaning the control panel and plastic parts:
Do not use a detergent or an alkaline spray to clean the control panel or plastic
parts as this may cause damage. Use a dry cloth to clean.
