Page: 12
7) Press
‘Start’
to save or
‘Stop’
to cancel
8) When a staged program is run the microwave will run through each stage
automatically without user input. The display will show total time for all
stages.
DOUBLE / TRIPPLE QUANTITY
Selecting
‘X2’
OR
‘X3’
will temporarily double or triple the program cooking time.
First press
‘X2’
OR
‘X3’
then enter desired programmed menu.
Note:
The time added is a fraction of the original program cooking time, not exactly
double/triple. The percentage can be changed by programming the
‘Cook Factor’
under
‘Advanced User Settings.’
PROGRAMING COOK FACTOR
1) Open the door
2) Press and Hold
‘Power Level’
for 5 seconds. The display will read
“PROGRAM”
3) Enter the Program number to be changed. To select program 10-199,
enter number in fast succession, e.g. 1-1, 1-2 etc.
4) Press
‘X2’
to change a cooking factor. Display will show current cooking
factor. Factory setting is 80%.
5) Enter 1-10 on numerical keypad to select new cooking factor
6) Press
‘Start’
to save or
‘Stop’
to cancel
