5
Using foil on a shelf may block heat to the
shelves above it. If foil is used ventilation holes
must be made every few centimetres.
TROUBLESHOOTING
If the Pie Warmer does not function check the
following points before calling for service.
The appliance is plugged in correctly and
the power switched on.
The power point is not faulty.
The on/off switch is not in the OFF position.
The thermostat is not set to OFF.
The thermostat and on/off switch knob are
not loose or broken, rendering the switches
inoperable.
If appliance is tripping RCD, this may be
caused by:
1.
Too many appliances on the same circuit
(relocate appliance to another circuit and
try again);
2.
Faulty appliance; or
3.
Moisture absorption into heating
element.
Tubular heating elements are subject to
moisture absorption which can result in RCDs
(residual current devices) tripping, particularly
when the appliance is not used for an extended
period, or stored in humid conditions.
Regular use can avoid moisture absorption.
LAMP REPLACEMENT
All ‘L’ model appliances have an internal light.
Remove the doors, racks, humidity pan, crumb
baffle and crumb tray and follow this procedure
to replace a failed lamp.
Unscrew the protective lamp cover and remove
it by sliding it off. Pull the lamp out to remove it.
Install the new lamp by pushing it into the lamp
holder.
CAUTION: Take care not to touch the new lamp
glass with your bare fingers. Hold the lamp with
a cloth to install it.
Screw the protective cover back on.
Partially Loaded Pie Warmer
Empty
Empty
Sausage Rolls, Pasties
Sausage Rolls, Pasties
Pies, Pizza Pockets
Full Pie Warmer
Sausage Rolls, Pasties
Sausage Rolls, Pasties
Pies, Pizza Pockets
Pies, Pies
Pies, Pies
