Roar Quad 15, Руководство пользователя

Страница: 26 / 28

26
11. S
PECIFICATIONS
– M
ODEL
: Q
UAD
15
Parameter Conditions/despription Value
Dimensions Standard 19” rack mounting, 2 units
W: 482 mm, H: 88.9 mm, D: 250 mm (excluding knobs and switches)
Weight 7.8 kg / 17.2 lbs.
Vacuum tubes Preamp: 2 x ECC83, 1 x 5751, ECC81 - Power amp: 1 x ECC83, 2 x 6V6
Power supply Silicon rectifiers with MOSFET regulated HV and bias supply. Short circuit proof HV supply.
Maximum power
consumption
~ 20 W power to speaker (clipped waveform) ~ 55 W
Idle power consumption No power to speaker ~ 45 W
Ambient temperature
range
No ventilation holes blocked - 10 °C to 50 °C
Thermostat disconnect
temperature
(Only occurs during faults, blocked ventilation holes or extreme
ambient temperatures)
~ 70 °C
MIDI Program Messages, all MIDI-channels accepted. 128 storable presets
MIDI input connector For 5 pin DIN cable: Pin 4 & 5: MIDI-signal, Pin1: GND, Pin 3: +12V Phantom power
For 7 pin DIN cable: Pin 4 & 5: MIDI-signal, Pin1&6: GND, Pin 3&7: +12V phantom power
MIDI thru connector 5 pin DIN connector, Pin 4 & 5 MIDI-signal (buffered)
Phantom power
(MIDI IN connector)
Voltage 12 V
Max current 400 mA
Audio inputs and outputs
INPUT front Input impedance, tip or ring to ground 1022 kohm (Hi-Z)
INPUT rear Input impedance 22 kohm (Lo-Z)
GUITAR OUT Output impedance (buffered signal from front input) 1 kohm for each output
SEND - output Send connector, tip, signal level
Output impedance
250 mV
RMS
(-10 dBV)
~ 430 ohm
Send connector, ring, signal level
Output impedance
1.4 V
RMS
(+4 dBu)
~ 4400 ohm
RETURN - inputs Return -10 dBV, signal level
Input impedance
~ 250 mV
RMS
(-10 dBV)
~ 10 kohm
4 dBu, signal level
Input impedance
1.3 V
RMS
(+4 dBu)
~ 40 kohm
AMP OUT – to slave Signal level, output impedance 1.3 V
RMS
(+4 dBu), ~ 200 ohm
Speaker outputs Impedance Min. 8 ohm total
Maximum output voltage +/- 25 V
PEAK
Max power, sine wave, 8 ohm to 16 ohm load ~ 15 W
Max power, clipped sine wave, 8 ohm to 16 ohm load ~ 20 W
Frequency response (-3 dB), internal speaker emulator load, sine
wave to return input.
40 Hz to 20 kHz
Website: www.roaramps.com
© ROAR amplification, Copenhagen, Denmark, 2021