RLPF200
Features & Functions
Installation
• 60” Power Cable
• 45 Super Bright LEDs
• Wire to 12 Volts DC
• 2 Scotch-Lok
®
connectors
• LEDs flash in variable pat
-
terns for flame effect
• Easy Installation
• Water Resistant
Dear Customer,
CONGRATULATIONS. The RLPF200 License Plate Frame,
when used as described, will give you years of dependable
service in your car, truck, RV or mini-van. We have taken nu
-
merous measures in quality control to ensure that your product
arrives in top condition, and will perform to your satisfaction. In
the rare event that your RLPF200 License Plate Frame contains
a damaged or missing item, does not perform as specified,
requires warranty service or you have an installation problem,
DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE
CALL OUR TOLL FREE NUMBER FROM THE U.S.A. AND
CANADA (800-445-1797)
and ask to speak with a member of
our technical service team, or submit your questions by e-mail
our web site roadmasterusa.com, and a member of our techni
-
cal service team will respond by e-mail to your questions. Our
in-house technical service team will expedite delivery of your
part, advise you on installation, or help troubleshoot a problem
with you. If your product needs warranty service, our techni
-
cal service team representative will help you obtain the fastest
remedy possible under the warranty.
Before You Install
Disconnect the RLPF200 wires at the “Try Me” battery pack
and button. Do not open the battery and pack. Do not discard
the battery pack and button in the trash. Please take it to your
local recycling center.
The RLPF200 can be mounted on the front or rear license
plate of your car.
You can supply power to the RLPF200 with the following
12VDC circuits.
a. License plate lamp (rear of car).
b. One of the Tail lamps (rear of car).
c. One of the Reverse lamps (rear of car, if you want the
RLPF200 to only light up when the car is in reverse).
d. One of the Headlamps (front of car).
1. You may want to temporarily place the RLPF200 on your
license plate. Use masking tape to hold the RLPF200 in place.
2. Make sure the power cable is long enough to reach the
area of the 12VDC circuit you have chosen to supply the
RLPF200.
When mounting on your rear license plate, make sure the
RLPF200 does not block the light of the vehicle’s license plate
light.
Mounting the RLPF200
1. Remove the license plate screws from your license plate.
2. Place the RLPF200 over your license plate.
3. Align the holes of the RLPF200 with the holes of your
license plate. Re-insert the screws.
4. Tighten the license plate screws. DO NOT OVER TIGHTEN
the screws, this will damage the RLPF200.
5. Drill a 5/32” diameter hole and pass the wires through for
access to the 12VDC circuit you have chosen to supply the
RLPF200.
4. Connect the White wire to the Po) side of the circuit
you have chosen to supply the RLPF200.
5. Connect the Clear wire to the - side of any of the above
listed lamps, or to chassis ground.
Frequently Asked Questions
Limited Warranty
ROADMASTER (USA) Corp.
®
products are designed and manufactured to provide a
high level of trouble-free performance. ROADMASTER (USA) Corp.
®
warrants, to the
original purchaser, that its products are free from defects in material and workman
-
ship for 30 days from the date of original purchase. As part of our commitment to
product excellence ROADMASTER (USA) Corp.
®
and/or its affiliates routinely im
-
prove the designs, materials or production methods of its existing products. Because
it is impractical to publicize all changes in every product, we reserve the right to make
such changes without notice.
CONDITIONS OF WARRANTY:
If during the 30 day warranty period your new product is found to be defective,
ROADMASTER (USA) Corp.
®
will repair such defect, or replace the product, without
charge for parts or labor subject to the following conditions:
1. All repairs must be performed by ROADMASTER (USA) Corp.
®
and/or its affiliates
in Eatontown, New Jersey.
2. The equipment must not have been altered or been damaged through negligence,
accident, or improper operation.
3. The replacement of parts are exempted from this warranty when replacement is
necessary due to normal wear and tear.
4.
All warranty claims must be accompanied by a copy of the sales receipt or bill of sale.
5.
Repair or replacement parts supplied by ROADMASTER (USA) Corp.
®
under this
warranty are protected only for the unexpired portion of the original warranty.
6.
In the case of car audio, this warranty does not extend to the elimination of car static or
motor noise; correction of antenna problems; costs incurred for the removal or reinstalla
-
tion of the product; damage to tapes, speakers, accessories or car electrical systems.
7. ROADMASTER (USA) Corp.
®
will not be responsible for any charge incurred for installation.
OWNER’S RESPONSIBILITIES:
ROADMASTER (USA) Corp.
®
will make every effort to provide warranty service within
a reasonable period of time.
SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED, OR IF YOU
WOULD LIKE ASSISTANCE IN OBTAINING SERVICE, PLEASE CALL TOLL FREE 1-
800-445-1797, 8:30am - 4:30pm EST.
In order to provide you with the proper warranty service, we request that you adhere
to the following procedure:
1. Include a copy of your sales receipt or bill of sale with your unit when it is returned
for warranty service.
2. If it is necessary to return your product for service, please return it securely packed,
preferably in the original shipping carton, and freight and insurance prepaid to the fol
-
lowing address: ROADMASTER (USA) Corp.
®
, Service Department, 41 James Way,
Eatontown, New Jersey 07724.
3. Please include a detailed explanation of the problem you are having.
4. If your product is found by ROADMASTER (USA) Corp.
®
to have a defect in mate
-
rial or workmanship, within the warranty period, it will be repaired or replaced at no
charge and returned to you prepaid. Where permitted by Iaw ROADMASTER (USA)
Corp.
®
liability shall be limited to that set forth in this warranty. This warranty shall be
the exclusive remedy of the purchaser.
ROADMASTER (USA) Corp.
®
makes no other warranty of any kind, expressed or
implied; and all implied warranties, are hereby disclaimed by ROADMASTER (USA)
Corp.
®
and excluded from this warranty, ROADMASTER (USA) Corp.
®
and/or its af-
filiates, the manufacturer, distributor and seller shall not be liable for any injury, loss
or damage, incidental or consequential, arising out of the use or intended use of the
product.
©2007 Intellectual Solutions Inc., All designs, logos and images are the exclusive property of Intellectual Solutions
Inc..and/or its affiliates. U.S. and Foreign Patnets Pending. All rights reserved. 083107 Printed in China 00000
Q. Is the RLPF200 legal?
A. The RLPF200 is intended for off road use only. Please
check with your local authorities concerning the legal use of
the RLPF200.
Q. Is the RLPF200 waterproof
?
A. The RLPF200 is water resistant.
Q. Can the RLPF200 be used in daylight?
A. It can, but it may not be very bright.
Flame Frame
60” Power Cable
2 Scotch-Lok
®
Connectors
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.roadmasterusa.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
SCotCh-Lok
®
InStRuCtIonS
Insert the existing
wire to be tapped.
Insert the wire to
be attached.
Crimp tap with pliers,
then close lock
You do not need to use the Scotch-LokTM
connectors. The camera can be wired di
-
rectly to the reverse light circuit by stripping the reverse light wires then twisting the
camera wires to the exposed reverse light wires. Once connected, you can wrap the
connection with electrical tape or shrinkable tubing made for wire splices. Do not at
-
tempt this if you are not knowledgeable with electrical installation practices.
