R
O
A
D
M
A
S
T
E
R
ROADMASTER, INC.
5602 N.E. SKYPORT WAY PORTLAND, OR 97218 1-800-669-9690
FAX (503) 288-8900
KIT NO. 1007-2 RETRO
• Use flat washers over all slotted holes • Use lock washers on all fasteners
IMPORTANT:
All brackets
must
be assembled with all the bolts left loose for final adjustment &
positioning (before tightening) unless otherwise instructed. All bolts
must
be torqued for proper strength.
If more than one bolt is used per fastening point, the diagram may only show one.
MOUNTING BRACKET KIT
INSTALLATION INSTRUCTIONS
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT
IN DEATH, PERSONAL INJURY OR PROPERTY DAMAGE
CAUTION:
SAFETY CABLES
MUST
CONNECT THE TOWING
VEHICLE TO THE TOWED VEHICLE FRAME TO FRAME.
FOLLOW SAFETY INFORMATION IN WARRANTY PACKET
CAUTION
1-800-669-9690
WARNING:
•
DO NOT
USE THIS DOCUMENT FOR CUSTOM FABRICATION AS THIS ILLUSTRATION MAY NOT SHOW ALL PARTS
OR STRUCTURAL COMPONENTS.
•
ROADMASTER WILL NOT BE RESPONSIBLE
FOR ANY DAMAGE OR INJURY RESULTING FROM ANY MODIFICATION
OR ALTERATION.
•
OWNER MUST INSPECT ALL MOUNTS AND BRACKETS BEFORE EACH USE
FOR CRACKS OR OTHER SIGNS OF
FATIGUE. ALSO INSPECT FASTENERS FOR PROPER TORQUE.
PARTS LIST:
1- RETRO PART (A) -
Passenger side
1- RETRO PART (B) -
Driver's side
6/25/99
