Road View RV-300HD, Руководство пользователя

Страница: 13 / 41

13
Cautions for Installation and Use
Installation
Please read the followings before you install the product.
• Please read the User's Manual carefully before installing the product.
• Before installing, turn off the ignition of your vehicle and remove the keys.
• Always keep your windshield glass clean to obtain high quality video recordings.
• If the product is equipped with a GPS module, keep it distant from other electronic devices (such as Hi-Pass or satellite navigation systems) to prevent radio interference.
• The quality of video recordings may varies depending on location and brightness.
• Dark tinting or metallic coating on the windshield may lower GPS reception and darken the video recordings.
If the product falls off while driving, it may lead to accidents or serious injuries. Before installing the product,
be sure to remove all foreign substances or dust from the windshield surface.
Micro SD Card
Before using your Micro SD card, please check the following.
• Make sure that the Micro SD card is genuine. Use of non-genuine Micro SD cards may result in data loss.
• Micro SCD card can be inserted into or removed from the product regardless of whether the product is turned On or Off. When the Micro SD card is inserted, the device's
software will be reset.
• When removing the Micro SD card from the product, turn the ignition off and wait until Operation LED is off (may take up to 20 seconds). If the Micro SD card is removed while
the product is powered on, warning will be sounded. When the Micro SD card is removed, the product cannot complete the video recording. The video recording may be deleted
partially. In some cases, the Micro SD card will no longer be usable.