Page ( 1 of 12)
INSTALL INSTRUCTIONS
Spartan Rear Bumper
Product : 4102XR
Application : 2010 — 2018 Ram 2500, 3500
Страница 1: ...Page 1 of 12 INSTALL INSTRUCTIONS Spartan Rear Bumper Product 4102XR Application 2010 2018 Ram 2500 3500 ...
Страница 2: ...ect and test fit your product to ensure proper fitment before having it coated painted bed lined etc Road Armor will not be responsible for the cost of coating your unit if any problems with fit or finish are not noted and addressed beforehand Metric Standard Socket Set Pick Screw Driver for sensor removal 6 1 2 13 x 1 1 2 Grade 8 Yellow Zinc Finish 16 1 2 x 1 062 OD Thru Hardened Yellow Zinc 10 1...
Страница 3: ...step for the other side of the bumper 2 Disconnect wire harness from trailer wire plug Once the wire harness is disconnected push in the clips on both sides of the plug and remove plug from bumper 3 Using a 15mm socket remove the two bolts that hold the bumper mounts to frame Repeat step for other side of bumper 4 Using a 15mm socket remove the two bolts which are located where the license plate m...
Страница 4: ...stability 7 Insert 2 1 2 bolt tabs per side into the frame brackets and secure in place with the 1 2 retaining nuts 8 Place bumper onto truck and attach the 1 2 hardware flat washer split lock washer and nut to the frame brackets 9 Adjust left right first and tighten frame brackets Then adjust up down and in out and tighten the 3 1 2 bolts per side 10 Wire in aftermarket license plate lights into ...
