Roach Conveyors 138LRC, Руководство пользователя

Страница: 16 / 24

MODEL 138LRC
PARTS LIST FOR UNIT WITH END DRIVE / SIDE MOUNT END DRIVE
Specify Unit Serial Number when ordering replacement parts to ensure proper allocation of components (See Ordering
Replacement Parts on page 15).
Recommended Spare Parts are shown in red. Charted are item numbers and part descriptions. When
ordering use example below.
Example: Need a replacement 138T tapered roller for 138LRC
Part No: SN 123456 - 2 - 138T tapered roller
ITEM
#
DESCRIPTION ITEM
#
DESCRIPTION
1 138G roller w/5/16” shaft 35 5/16” flat washer
2 138T tapered roller 36 3/8” flange nut
3 138G grooved roller w/5/16” hex shaft 37 3/8” flat washer
4 Take-up sheave mounting channel 38 7/16” lock washer
5 45°/90° inside curve channel 39 1/2” hex nut
6 Splice plate 40 1/2” lock washer
7 Bolt-in butt coupling, left hand 41 1/2” flange nut
8 Bolt-in butt coupling, right hand 42 1/2” flat washer
9 Pillow block mounting bracket 43 Orange nylon finger guard
10 Take-up rod support angle 44 Black nylon sheave spacer/adapter
11 Sheave mounting channel 45 V-belt sheave w/1-3/16” bore
12 Idler sheave angle 46 Nylon 3” O.D. V-groove sheave
13 Left hand outside tangent drive channel 47 Steel 4” O.D. V-groove take-up sheave
14 Right hand outside tangent drive channel 48 V-belt
15 Left hand inside tangent side channel 49 Drive band
16 Right hand inside tangent side channel 50 Motor
17 Take-up mounting angle 51 Gear reducer
18 45°/90° outside curve channel 52 Drive sprocket
19 Tail sheave shaft 53 Gear reducer drive sprocket
20 Drive sheave shaft 54 #50 (thru 1-1/2 HP) ir #60 roller chain
21 Bed spacer rod 55 Chain guard angle mount (Not shown)
22 3 hole flange bearing w/1-3/16” bore 56 Reducer push plate assembly
23 Pillow block bearing w/1-3/16” bore 57 Underneath motor base plate
24 3/8” x 3/4” HHCS 58 End drive chain guard assembly
25 3/8” x 1-1/4” HHCS
26 3/8” x 1-1/2” HHCS OPTIONAL SIDE MOUNT END DRIVE PARTS LIST
27 3/8” x 1-3/4” HHCS 50 Motor
28 3/8” x 2-1/4” HHCS 51 Gear reducer
29 7/16” x 1” HHCS 52 Drive sprocket
30 1/2” x 1-1/2” HHCS 53 Gear reducer drive sprocket
31 1/2” x 6” HHTB 54 #50 (thru 1-1/2 HP) ir #60 roller chain
32 5/16” x 3/4” carriage bolt 55 Reducer push plate assembly
33 3/8” x 3/4” carriage bolt 56 Side mount motor base plate
34 5/16” flange nut 57 Side mount chain guard assembly
16