5
High-Contrast Full Color
Black on White (high-contrast positive)
White on Black (high-contrast negative)
Yellow on Blue
Yellow on Black
You can also activate up to 27 additional color modes. For a complete list, refer to
Color Modes
. To add more color modes, refer to
Adding and Removing Color
Modes
.
There are two ways to move through the list of color modes:
Press the blue COLOR MODE button, located in the upper right of the remote
control, to cycle through and select different color modes.
Press the UP or DOWN ARROW buttons to move to the previous or next color
mode. You can only do this when shading or masking is off.
Aiming the Camera at Distant Objects
If you are currently focused on an object, but you want to move the camera to another
object, use the FIND button to help you aim the camera, locate the center of the new
object using the crosshairs displayed on the screen, and return to your initial
magnification level.
1. Press and hold the red FIND button (upper center section of the remote control).
Crosshairs display on the screen indicating the center of the image on the screen,
and then the camera zooms out.
2. While still holding the button, move the camera and center the crosshairs on the
new object you want to view.
3. Release the red FIND button. The camera zooms in to its previous magnification
level and the crosshairs turn off.
Flipping an Image
With the ONYX HD camera, you can change the screen orientation so that the image
is flipped and mirrored both horizontally and vertically.
This function is useful when the object you are viewing is upside down. For example,
if you receive a heavy package, it may be easier to flip the image around instead of
turning over the package.
Press the light blue FLIP button (upper left of the remote control), to cycle through
the four different picture orientations. The camera will remember this setting the
next time you rotate it back to this position.
