4
To permanently save these settings, you must power off the unit using the green
POWER button on the remote control. If you turn off the unit using the main power
switch, your most recent changes are not saved.
Rotating and Tilting the Camera
Camera arm joint swings 180°
Camera arm rotates 330°
Camera tilts 315°
Carrying the unit
The unit has an integrated handle that makes it very easy to transport. When carrying
the unit, always lower the camera arm first.
Important:
Never move or carry the unit by the camera arm or camera.
Using ONYX Deskset HD
This section describes how to change magnification and brightness, locate objects,
change color modes, and more using the remote control. For more information about
the remote control and its buttons, refer to
Remote Control Functions
.
Before you begin, make sure the unit is turned on. If necessary, press the green
POWER button on the remote control to turn on the camera.
Changing Magnification
Press the black PLUS button (center right of the remote control) to zoom-in and
enlarge the object that appears on the screen.
Press the black MINUS button (center right of the remote control) to zoom away
from the object on the screen.
Adjusting Brightness
To make the image lighter, press the top yellow BRIGHTNESS button (center left
of the remote control).
To make the image darker, press the bottom yellow BRIGHTNESS button (center
left of the remote control).
Changing Color Modes
A color mode is a pre-defined color combination (for example, yellow text on a black
background). You can use color modes to reduce glare and provide contrast to make
it easier to read text on the screen. The unit has six default color modes:
True Full Color
– always available, cannot be deleted
