13
2. With the monitor facing the back of the carrying case, lower the unit.
3.
Close the case and either use the case’s handles to carry it, or use the convenient
telescoping handle to wheel the unit.
Troubleshooting
The screen is blank.
Make sure the main power switch is on.
Ensure that the green Power LED for the camera is on. The LED is on the bottom of
the camera.
Make sure the power cable is correctly connected to the unit and the wall outlet.
Reduce the magnification level using the black MINUS button.
Try adjusting brightness using the yellow BRIGHTNESS buttons.
Press the blue COLOR MODE button to switch to a different color mode.
The unit does not turn on.
Make sure that the main power switch is in the on position.
Ensure that the remote control is working. The red LED in the upper left corner of the
remote control flashes when a button is pushed. If this does not happen, replace the
two AAA batteries.
Make sure that you use the remote control that is paired with your camera.
Ensure that the wall outlets have power and are not malfunctioning. If the outlets are
connected to a wall switch, make sure that the switch is on.
The image on the screen is too bright, or there is a glare from the screen that
makes it difficult to see.
Press the bottom yellow BRIGHTNESS button to reduce brightness.
Press the blue VIDEO MODE button to switch to a different color mode.
The image on the screen is too dark.
Press the top yellow BRIGHTNESS button to increase brightness.
Press the blue VIDEO MODE button to switch to a different video mode.
The document I am reading is out of focus.
For close-up reading, make sure the close-up lens is closed while the camera is
pointing down on the document. Refer to
Positioning Camera for Long Distance or
Close-up Work
for more information.
The image on the screen is blurry or unfocused.
Make sure the close-up lens is in the correct position: closed for reading or self-
viewing, and open for distance viewing.
Ensure that Focus Lock is off. You can press the orange FOCUS LOCK button to turn
Auto Focus on or off.
Make sure the lens is clean.
Check that the object that you are trying to view is centered on the screen. The
camera might be trying to focus on something else.
