To mute an individual output channel on the device:
1. Open the
Analog Output Configuration
tab in the
OUTPUT
section
2. Initially, the cursor will highlight all output channels. Press the encoder, then rotate the encoder to
move the cursor to the channel that should be muted.
Cursor (current channel)
Channel Mute
3. Move the cursor to
Mute
Toggle and push it.
To mute an output channel using the web remote:
1. Select an analog output channel by clicking the corresponding channel strip. The channel strip turns
blue.
2.
(optional)
Click and drag left or right to select multiple channels.
3. Toggle the
Mute
switch. The status is reflected with a red
M
in the corresponding level meters.
10.3. MADI Outputs
The MADI outputs of the M-32 DA Pro are always active. If no routing is configured, an empty stream is
sent that can be used for clocking. The state without routing is represented with a light-green Status
Indicator.
10.3.1. Setting the Output Channel Format and Frame Pattern
Depending on the requirements of the receiver, it is possible to change the channel format and frame
pattern of the outgoing MADI streams.
RME M-32 DA Pro User’s Guide
45
| 10.3. MADI Outputs
