RME Audio M-32 AD Pro Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 59

background image



Since there are two independent MADI ports, the total supported number of channels
can be multiplied by two. Since there are four independent AVB streams, the total
supported number of channels can be multiplied by four. The analog channel count is
always 32 regardless of sample rate. The maximum amount of digital inputs is 192
channels (at 48 kHz, 64 Ch MADI). The maximum amount of digital outputs is 192
channels (at 48 kHz, 64 Ch MADI).

11.3.3. Selecting a Sample Rate

To configure the device sample rate on the device:

1. Enter the

CLOCK

section. The cursor highlights the currently selected clock.

2. Rotate the encoder to highlight the current sample rate.

3. Push the encoder. Two blue arrows will appear to indicate that the encoder can now be used to

change the current setting.

4. Rotate the encoder until the preferred sample rate is shown.

5. Push the encoder again to activate the setting.

To configure the device sample rate on the web remote:

1. Locate the

Select sample rate

drop down menu in the

CLOCK

section.

2. Select a sample rate from the drop down menu. The new rate is automatically applied.

11.3.4. Effects of Sample Rate Changes on Existing Routing

The M-32 AD Pro saves one routing table per preset, regardless of sample rate. A change of sample rate
or MADI frame mode can reduce the number of input and output channels available for routing. This
does not alter the routing table. Any existing routing is hidden until another change of sample rate re-
enables the channels.

Example:

A routing is created at 96 kHz with 32 channels, sending the MADI coaxial Input 1-32 to optical MADI
Output 1-32. If the sample rate is now changed to 176.4 kHz and the 56 Ch frame is activated, only the
first 14 channels of MADI coaxial input are routed to the optical output. Switching the sample rate to
44.1 or 48 kHz will reveal the previous routing for 32 channels.

11.4. Set Word Clock Output to Single Speed

At sample rates > 48 kHz, it may be necessary to synchronize two devices with a fraction of the actual
sample rate:

Sample Rate

Word Clock Full Speed (default)

Word Clock Single Speed
(option)

88.2 kHz

88.2 kHz

44.1 kHz

RME M-32 AD Pro User’s Guide

11.4. Set Word Clock Output to Single Speed |

48

«
...
50
51
52
53
54
...
»

Содержание M-32 AD Pro




























































Отзывы:

Нет отзывов

Похожие инструкции для M-32 AD Pro

Бренд: Samsung Страницы: 37

Бренд: Samsung Страницы: 2

Бренд: Daewoo Страницы: 36

Бренд: National Instruments Страницы: 10

Бренд: Naxa Страницы: 36

Бренд: Audio Note Страницы: 7

Бренд: Allen-Bradley Страницы: 4

SignalPilot 51840

Бренд: Esu Страницы: 32

Бренд: T+A Страницы: 74

Бренд: Pro-Ject Audio Systems Страницы: 20

EZWALL-pro 3x3 v3

Бренд: SmartAVI Страницы: 14

Delta UM Series

Бренд: MasterPower Страницы: 29

Бренд: ICP DAS USA Страницы: 2

Бренд: Velleman Страницы: 11

QM1003-0.5-18-2

Бренд: Quonset Microwave Страницы: 100

Бренд: Casti Страницы: 4

Бренд: Missing Link Страницы: 8

Бренд: DX Engineering Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды