On the display, a warning is signaled as an icon with a red bar:
Power loss at PSU 2
To activate the warning on the device:
1. Open the
power
tab in the
STATE
section.
2. Toggle the switch
Redundancy
to
On
.
The warning signals only the current state.
To activate the warning on the web remote:
1. In the
STATE
section, activate the toggle next to
Power Loss Warning
.
8.2. Presets
Any change in the device configuration is persistent. After a power loss, the device will revert back to its
last state. Additionally, the M-1610 Pro can save fifteen states in presets numbered 1-15. After a preset
is loaded, any change in the configuration will result in an
unsaved changes
state.
Representation of an unsaved preset on the device.
The internal preset storage is not affected when the device firmware is updated to a newer
firmware version. Moreover, recalling the factory default preset does not delete any other
saved preset.
Settings that are not saved in a Preset
The following settings are
not saved
in a preset:
• Auto-lock
• Lock code
• Remote control
8.2.1. Saving Presets
Up to 15 presets can be saved in the internal storage of the M-1610 Pro.
RME M-1610 Pro User’s Guide
27
| 8.2. Presets
