manualshive.com logo in svg

RME Audio 12Mic-D, Руководство пользователя

Поделиться
Скачать
RME Audio 12Mic-D Скачать руководство пользователя страница 6

1. Safety Precautions

 

WARNING

DO NOT OPEN DEVICE - RISK OF ELECTRIC SHOCK

The unit has non-isolated live parts inside. No user serviceable parts inside. Refer
service to qualified service personnel.

 

CAUTION

General Safety Information

Read read the following safety information thoroughly and keep it in a safe place
for later reference.

KEEP AWAY FROM WATER AND MOISTURE

Prevent moisture and water from entering the device. Never leave objects
containing liquid on top or near the device. Do not use this product near water, i. e.
swimming pool, bathtub or wet basement. Danger of condensation inside - do not
turn on before the device has reached room temperature.

ENSURE PROPER VENTILATION

Do not cover the vents on the side of the unit. Ensure proper ventilation to avoid
overheating. The maximum ambient operating temperature of the device is 35° C
(95° F).

MAINS

The apparatus shall be connected to a mains socket outlet with a protective
earthing connection. Do not use defective power cords. Ensure that the AC socket
outlet for the device or an external power supply is easily accessible.

Operation of the device is limited to the description in this manual.

NOTICE

Read the User Manual

Read the manual completely before using the product. It includes all information
necessary to use and operate this device.

RME 12Mic-D User’s Guide

1

 | 1. Safety Precautions

Содержание 12Mic-D






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды