July 2022
© RLS Wacon analytics GmbH +49 (0)5121 281260
Pag
e
54
Subject to
change without notice
Configuration
Analysis stop
Car. Stop interval after limit value exceeded?
Select [Yes] or [No] with [
◀
] and [
▶
]
confirm with [OK].
[Yes] Auto. Interval is paused after a limit value is exceeded.
(To carry out further analyses, the automatic mode
must be activated again on the device).
[No] Further analyses are carried out even after the limit
value has been exceeded.
Entrance 1
Select the function of the input.
Press the [OK] key.
Input 1
You have the following choices at the entrance:
•
Disabled
•
Start analysis
•
Water meter for quantity interval
•
Flow monitor for analyses during operating time
•
Interval reset for softener switchover
Make your selection and confirm with the [OK] key.
Start analysis when selected
An analysis is started as soon as the "INPUT 1: Input contact"
terminal 13 is bridged to terminal 14.
(When using this function, the Sycon must be in automatic
mode).
