RLE Technologies WiNG-MGR Скачать руководство пользователя страница 65

Страница: 65 / 102

rletech.com

WiNG-MGR User Guide

Web Interface

3.7.6 Users

The WiNG-MGR allows you to configure user privileges for up to eight unique users. User 1

is always the Administrator’s slot. Use users 2 - 8 to either configure users with read only

access, or to configure additional Admin accounts.

Figure 3.31

Users Page

Option

Description

Login Required

Designate when login is required on this WiNG-MGR:

•

Never - No one is ever required to log into the WiNG-MGR.

Anyone can access the device and read all the data, and

anyone can make changes to all the settings within the device.

•

To Make Changes - Users must be logged in to make changes

within the WiNG-MGR. Anyone can access the device and read

all the data, but you must be logged in to change any of the

configuration and settings.

•

Always - All users must log in to gain access to the WiNG-

MGR. You must be logged in to read or access any data within

the WiNG-MGR, and you also must be logged in to make any

changes within the WiNG-MGR.

User Configuration

Username

Each user that will log into the WiNG-MGR needs their own unique

username. Enter a username in this field.

Password

Assign a password for this username.

Privilege

Select which level of access this user will have:

•

View Only - This user can view pages within the web interface

but cannot make any changes to settings or configuration.

•

Administrator - This user can view data and make changes to

settings and configuration options.

Table 3.22

Users Configuration Options

Содержание WiNG-MGR







































































































Результаты поиска

Содержание WiNG-MGR

Отзывы:

Бренды по названию

Популярные бренды

RLE Technologies WiNG-MGR, Руководство пользователя

Результаты поиска

Содержание WiNG-MGR

Отзывы:

Бренды по названию

Популярные бренды