manualshive.com logo in svg

RLE Technologies WiNG-MGR, Руководство пользователя

Поделиться
Скачать
RLE Technologies WiNG-MGR Скачать руководство пользователя страница 15

rletech.com

WiNG-MGR User Guide

15

C

H A P T E R

C

HAPTER

 0

G

ETTING

 S

TARTED

2.1. Installation

The WiNG-MGR can be rack or wall mounted, or left free standing. The WiNG-MGR ships 

with rack mount tabs. Wall mount tabs are sold separately. 

♦ 

Mount the WiNG-MGR in either the front or the back of a 19-inch rack - You will need two 

of RLE’s L-shaped rack mount tabs (included with the WiNG-MGR). Remove the screws 

from the sides of the WiNG-MGR, put the tabs in place, and reapply the screws. Mount the 

device in the front or the back of your rack. Use the preferred anchoring method as 

suggested by the rack manufacturer to mount the unit securely.

♦ 

If you would prefer to mount the WiNG-MGR on a wall, wall mount tabs (sold separately) 

provide a secure solution. Remove the screws from the sides of the WiNG-MGR, put the 

wall mount tabs in place, and reapply the screws. Mount the device securely in the desired 

location.

Содержание WiNG-MGR







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды