142 • Using Maintenance Mode
Gas Tracer Operator’s Manual, CSA Version
13. Use the AIR
▲
or (SHIFT)
▼
buttons to change the setting and press POWER
ENTER when finished to save the setting and return to the Alarm Points
Screen.
14. When you are finished making adjustments, use the AIR
▲
or (SHIFT)
▼
buttons to select ESCAPE and press POWER ENTER. You will be returned to
the ALARM--P screen in the main menu.
Turning the Clear Data Logger Screen On or Off
The DLOG DSP menu item allows you to turn the Clear Data Logger Screen on
or off. When set to ON (factory setting), the Clear Data Logger Screen appears in
Display Mode and allows the user to clear any logged data. When set to OFF, the
Clear Data Logger Screen does not appear in Display Mode and any logged data
cannot be cleared from Display Mode.
1. Use the AIR
or (SHIFT)
buttons to display the DLOG DSP menu item.
2. Press and release the POWER ENTER button. The screen will indicate the
current setting.
3. Use the AIR
or (SHIFT)
button to display the desired setting.
4. Press and release the POWER ENTER button to save the setting and return to
the main menu.
- - -
ppm
MAINTENANCE
ALARM--P
CO
MAINTENANCE
DLOG DSP
On
MAINTENANCE
DLOG DSP
