- 28 -
5-3. Log data display
The data recorded by the snap logger can be viewed.
The "REC DATA" screen is displayed only when the clock function is enabled (See "6-3. Clock function
ON/OFF setting" on page 32).
1
On the "REC DATA"
screen in the display
mode, press the POWER
button.
The detector enters the log data
display.
The recorded date/time is
displayed and the station ID and
memory number are displayed
alternately. If there is no
recorded data, "NO DATA" is
displayed.
* When there is no recorded data
2
Press the MODE or AIR
button to select log
data to be displayed.
The recorded content switches
to the other every time the
button is pressed.
<Station ID> <Memory number>
3
When the target log
data is displayed, press
the POWER button.
The gas name and peak value
of the selected memory are
displayed alternately.
4
To exit the display,
press the MODE and
AIR buttons at the same
time.
The detector returns to the
display mode.