27 • Connecting the SV-3, Optional
Connecting the SV-3, Optional
1 . Be sure that the SDM-6000(s) are not connected to power.
2 . Line up the mating electrical connection and mating sample fitting connections
on the SV-3 with the electrical connector and sample fittings on the left side of
the left-most SDM-6000.
3 . Push the SV-3 toward the SDM-6000 until the housings are touching.
4 . Use the provided metal connection brackets and screws to secure the back
and bottom of the SV-3 to the SDM-6000.
Figure 20: Connecting the SV-3
Bottom P anel
Back P anel
