GasWatch 3 for CO and O
2
Chapter 4: Display Mode • 29
4. Press and release POWER/MODE to save the User ID and return to the
USER ID
screen
in Display Mode.
Changing the Station ID (STN ID)
This screen only appears if
DISP.SET
in User Mode is set to
ON
(factory setting) and if
ID
DISP
in Maintenance Mode is set to
ON
(factory setting is
OFF
).
Use this screen to select a station ID from the 128 station IDs that are stored in the GasWatch
3’s memory. Before a station ID is selected on a brand new instrument, the station ID is
“----------”. The factory-installed station IDs have a “S_ID_XXX” format.
The station ID provides a way to identify the GasWatch 3 location during a data logging
session.
User IDs can only be selected in this menu item. In order to edit the 128 user IDs, you must
use the GasWatch 3 Datalogging Program or GasWatch 3 Setup Program.
1. After entering Display Mode, press and release POWER/MODE until the
STN ID
screen
sequence appears.
2. To change the Station ID, press and release AIR. The current Station ID flashes.
3. Use AIR to scroll to the desired Station ID.
4. Press and release POWER/MODE to save the Station ID and return to the
STN ID
screen
in Display Mode.
SID_001
Id
StN
CHG / AIR
Id
StN
NO / MODE
Id
StN
SID_001
Id
StN
