RK Rose+Krieger RK MultiControl II duo, Руководство по сборке

Страница: 200 / 230

2. Press the ( ) button if the number of connected control
units and drives is correct.
If the number is not correct, press the
( ) button.
ð
The bus connection has been activated.
3. Carry out an initialization run
Ä
Page 180 .
Once the synchronisation bus has been con-
nected, activated and initialized, the hand switch
with 2 buttons
Ä
Page 161 can also be used to
operate the bus connection.
To do so, replace the hand switches
Ä
Page 153.
7.5.5.2 “Deactivate BUS connection” menu
This function deactivates the bus system so that a
control unit can be operated individually in the syn-
chronisation bus.
This function cannot be activated when drive group
management is activated.
Activating the bus connection
Fig. 108: Activating the bus connec-
tion
Carrying out an initialization run
Operating the hand switch with 6 function buttons
Control menu > Sync-BUS settings menu
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 200