RK Rose+Krieger RK MultiControl II duo, Руководство по сборке

Страница: 165 / 230

No. Butto
n
Function
Fig. 30/7
Press the [F] button to call up the short menu
Ä
Page 170 .
* The buttons are only marked with the numbers “1” and “2” in these instructions for rea-
sons of clarity. In reality the function buttons are not marked.
Symbol Function
Logo RK Rose+Krieger GmbH
Synchronisation bus (sync bus) activated
Function of the control unit in the sync BUS (s: slave; 5: number of the slave (1
-
7))
Function of the control unit in the sync BUS (m: master; maximum of one master per sync
BUS)
The hand switch has been reset. Symbol is displayed for 5 seconds
A password for the functions has been entered in the “Control” menu.
To disable the functions or to enter another password, call up the menu item
“Logout” Ä Page 211 .
Active user (1
-
3, in this case: user 1)
Upward stroke limitation active
Downward stroke limitation active
Synchronous movement of both drive groups
Parallel movement of both drive groups (non-synchronous)
Current height indication with set unit of measure (in this case 28.7 cm)
Press function button . Memory position 1 of the active user is assumed.
Press function button . Memory position 2 of the active user is assumed.
Press function button . The symbol corresponding to this display is confirmed.
Symbols on the display screen
Operating the hand switch with 6 function buttons
Overview
20.08.2021 Control unit RK MultiControl II duo/RK MultiControl II quadro 165