A Declaration of incorporation
EC Declaration of Incorporation according to the Machinery Directive 2006/42/EC, Appendix II 1.B.
Manufacturer
Authorised representative
RK Rose+Krieger GmbH
Potsdamer Strasse 9
32423 Minden
GERMANY
Michael Amon
Potsdamer Strasse 9
32423 Minden
GERMANY
Description and identification of the incomplete machine:
Product:
See rating plate label on the front of this operating manual
Type:
See rating plate label on the front of this operating manual
Serial number:
See rating plate label on the front of this operating manual
Project number:
See rating plate label on the front of this operating manual
Order:
See rating plate label on the front of this operating manual
Function:
Technical description:
A rotation movement is converted into a linear position movement of the
guide carriage via a timing belt.
The following basic requirements of the Machinery Directive 2006/42/EC as per Appendix I have been
applied and met:
1.1.5.; 1.3.; 1.3.2.; 1.3.4.; 1.3.7.; 1.3.8.; 1.3.9.; 1.6.1.; 1.6.3.
Furthermore, it is hereby declared that the special technical documents as per Appendix VII, Part B have
been created.
It is expressly declared that the incomplete machine complies with all relevant regulations of the following
EC Directives:
2006/42/EC
Directive 2006/42/EC of the European Parliament and of the Council of
17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
2011/65/EU
Directive 2011/65/EU of the European Parliament and of the Council of
8 June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Reference to the harmonised standards according to Article 7, Paragraph 2:
EN ISO 3744:2011-02
Acoustics
-
Determination of sound power levels and sound energy levels of
noise sources using sound pressure measurements
-
Accuracy class 2
enveloping surface methods for an essentially free field over a reflecting
plane.
EN ISO 13857:2020-04
Safety of machinery
-
Safety distances to prevent hazard zones being
reached by upper and lower limbs.
EN ISO 12100:2011-03
Safety of machinery
-
General principles for design
-
Risk assessment and
risk reduction.
Declaration of incorporation
14.10.2021
Linear unit RK MonoLine R/RK MonoLine Z
131
