RJM MINI EFFECT GIMZO X, Руководство пользователя, Страница: 6 / 26

FRONT PANEL
Loops 1 through 6 - These buttons turn audio loops 1 through 6 on and o ff . Each button lights up to
indicate that the corresponding audio loop is active.
Switches 1 and 2 - These buttons turn function switches 1 and 2 on and o ff . Each button lights up to
indicate that the corresponding function switch is active. Refer to the Function Switches section for more
details.
Bu ff er - When pressed briefly, this button will turn the input bu ff er on and o ff . The LED is green when the
bu ff er is on and yellow when it’s o ff . When held down for 3 seconds, this button stores the current state
of all switches to non-volatile memory. The buttons will flash to confirm that the state has been stored.
Please note that the store function doesn’t work until a preset has been selected from a MIDI controller. If
the LEDs don’t flash after holding for 3 seconds, that means that either your MIDI connection isn’t
correct, your MIDI channels are not set correctly, or your MIDI controller isn’t sending a Program Change
message.
6
1 6 5 4 3 2
MINI EFFECT GIZMO
LOOPS SWITCHES BUFFER
RJM MUSIC TECHNOLOGY
HOLD TO STORE
2 1