RJM MINI EFFECT GIMZO X, Руководство пользователя, Страница: 12 / 26

Custom cable - it’s possible to make adapter cables that adapt from the MEGX’s function switch jack to
the proprietary footswitch jack on certain amps. Custom cable builders like Best-tronics are able to make
these cables.
The default settings for each switch are latching and normal (non-inverted). These settings will work with
the majority of amps. If your amp has di
ff erent requirements, you can use Setup Mode or the Mini E ff ect
Gizmo X editor software to change the function switch settings.
The function switches can also be used to control features on certain pedals. For example, the “Favorite”
switch on Strymon pedals or the “Red Remote” switch on JHS pedals.
FUZZ MODE
Certain pedals such as fuzzes, wah pedals and some compressors are designed to have a guitar
plugged directly into them, and don’t sound as good when there’s a bu
ff er between the guitar and e ff ect
input.
To avoid this problem, but still retain the benefits of a bu ff er, we’ve created fuzz mode. This allows you to
tell the Mini E ff ect Gizmo X that a loop has a fuzz or other bu ff er-sensitive pedal connected. When that
loop is turned on, and is the first active e ff ect in the chain, the bu ff er will automatically bypass until the
loop is no longer the first active e ff ect in the chain. Any or all loops can have fuzz mode enabled. Fuzz
mode can be configured using Setup Mode or the Mini E ff ect Gizmo X editor software.
12