RJM MINI EFFECT GIMZO X, Руководство пользователя, Страница: 10 / 26

• If a stereo loop is followed by a mono loop, the left side of the stereo signal is sent to the mono loop.
Typically, you would put all of your mono e ff ects before the stereo e ff ects so that the stereo image is
never lost.
MONO IN, STEREO OUT EFFECTS
Some e ff ects have mono inputs and stereo outputs. The Mini E ff ect Gizmo X editor software can be used
to configure a loop this way - it can’t be done using the onboard setup mode.
Mono in, stereo out e ff ects work best if you only have one of them (or only turn one on at a time), and
they’re placed in between your mono and full stereo e ff ects. Any stereo e ff ects placed before a mono in,
stereo out pedal will only pass the signal from its left output to the next pedal.
10