RJG Lynx LE-R-50-REVB, Руководство по эксплуатации продукта

Страница: 19 / 22

Product Manual | Lynx™ 50-Inch Stroke/Velocity Sensor LE-R-50-REVB
13
RELATED PRODUCTS
COMPATIBLE PRODUCTS
LYNX CABLES CE‑LX5
The Lynx sensor cable (
1
at right) is a
polyeurethane‑coated cable suited for the
heat and stress found in injection molding
environments. The cable is available in
lengths from 11.8– 472.4” (0,3– 12 m), and
can be ordered with straight or 90° fittings.
One CE‑LX5 is required to interface the
LE‑R‑50‑REVB with the eDART or CoPilot
system.
1
EDART PROCESS CONTROLLER
The eDART process controller (
2
at right)
is the base hardware unit for the eDART
system. The eDART system is the most
powerful process control system in the
industry, allowing molders to stabilize and
control injection molding processes and
contain bad parts, ensuring high quality
and cost‑reduction.
COPILOT SYSTEM
The CoPilot system (
3
at right) is a
process match assistant that monitors
process values based on a stable template
and provides advice to systematically
restore values to the optimal values when
changes occur. The CoPilot also provides a
process change log that includes detailed
date, time, user, problem, solution, and
notes of each process change.
2
3