Back Legs Frame
1pc.
8pcs.
8pcs.
8pcs.
Riverside
Furniture
Made in Viet Nam
Page 1 of 1
2 pcs.
F
G
H
I
B
C
email:[email protected]
73455
UPH CURVE-BACK
COUNTER STOOL
Dining Room
Assembly Instructions
Be sure to check all packing material carefully for small parts, which may have come loose inside
the carton during shipment.
Components and Hardware List (for one chair)
Front Legs
1 Left / 1 Right
5/16" x 12mm x 3mm
Lock Washer
5/16" x 19mm x 2mm
Flat Washer
5/16" × 2" Long
Allen Head Bolt
5mm
Allen Wrench
STEP 1
F
G
H
I
Front Strecher
1 pc.
2 pcs.
E
Side Strecher
1 Left / 1 Right
D
A
1 pc.
C
B
D
B
STEP 2
6 pcs.
J
#8 x 1-1/4"
Wood Screw
Chair Back
1pc.
A
Cascade
Do not fully tighten the bolts until the complete chair has been assembled.
Once the complete chair is assembled, set it upright on a flat surface to level
the chair. Using the provided allen wrench, tighten all the bolts.
Make sure the stretchers are pulled snug to the front and back legs, then
install the wood screws (J) using your Phillips screwdriver.
