Riverbed SteelHead 5080, Руководство по установке и настройке

Страница: 23 / 94

Product Overview | 23
Upgrading RiOS
User permissions
Upgrading from RiOS 8.6 to 9.0 and later requires additional user permissions for path selection and
QoS. For example, a user with QoS read/write permission in a previous version will no longer have
permission to configure a QoS rule. In RiOS 9.0 and later, a user needs read/write permission for network
settings in addition to read/write permission for QoS.
This table summarizes the changes to the user permission requirements for RiOS 9.0 and later.
Management console
page To configure
this feature or
change this
section Required read permission Required read/write
permission
Networking > Topology:
Sites & Networks Networks Network Settings Read-Only Network Settings Read/Write
Sites Network Settings Read-Only
QoS Read-Only
Path Selection Read-Only
Network Settings Read/Write
QoS Read/Write
Path Selection Read/Write
Networking > App
Definitions: Applications Applications Network Settings Read-Only Network Settings Read/Write
Networking > Network
Services: Quality of
Service Enable QoS QoS Read-Only QoS Read/Write
Manage QoS
Per Interface Network Settings Read-Only Network Settings Read/Write
QoS Profile QoS Read-Only QoS Read/Write
QoS Remote
Site Info Network Settings Read-Only
QoS Read-Only
—
Networking > Network
Services: QoS Profile
Details Profile Name QoS Read-Only QoS Read/Write
QoS Classes QoS Read-Only QoS Read/Write
QoS Rules QoS Read-Only Network Settings Read/Write
QoS Read/Write
Path Selection Enable Path
Selection Network Settings Read-Only Network Settings Read/Write
Path Selection
Rules Network Settings Read-Only
Path Selection Read-Only
Network Settings Read/Write
Path Selection Read/Write
Uplink Status Network Settings Read-Only
Path Selection Read-Only
Reports Read/Write
—
Outbound QoS Report QoS Read-Only QoS Read/Write
Inbound QoS Report QoS Read-Only QoS Read/Write