Steelhead Appliance Installation and Configuration Guide
43
Bypass Card Status Lights
Overview of the Steelhead Appliance
Bypass Card Manufacturing Numbers Series xx00, xx10, and xx20
The following section describes the bypass card manufacturing part numbers. To determine the
manufacturing part number for your bypass card, run the show hardware command in the CLI.
Two-Port Copper Fast-Ethernet Bypass Card
The following section describes the Two-Port Copper Fast-Ethernet Bypass card (150-00001) status lights.
Figure 1-25. Two-Port Copper Fast-Ethernet Bypass Card
The following table describes the Two-Port Copper Fast-Ethernet Bypass card status lights. The status lights
on the left correspond to the LAN link; the lights on the right correspond to the WAN link.
Description
Old Manufacturing
Part #
New Manufacturing
Part #
Orderable Part #
Two-Port Copper Fast-Ethernet Bypass
Card
CMP-00005
150-00001
Only on existing
models
Two-Port Copper Gigabit-Ethernet Bypass
Card-A
CMP-00053 150-00004
CMP-NIC-2TX0
Two-Port Copper Gigabit-Ethernet Bypass
Card-B
CMP-00028
150-00002
CMP-NIC-2TX1
Four-Port Copper Gigabit-Ethernet Bypass
Card
CMP-00074
150-00006
CMP-NIC-4TX0
Six-Port Copper Gigabit-Ethernet Bypass
Card
N/A
150-00011
CMP-NIC-6TX0
Two-Port SX Fiber Gigabit-Ethernet Bypass
Card
CMP-00062
150-00062
CMP-NIC-2SX0
Four-Port SX Fiber Gigabit-Ethernet
Bypass Card
CMP-00135
150-00010
CMP-NIC-4SX0
LED
Status
Description
Intercept/Bypass
(Activity)
FLASHING (GREEN)
Data Transmission is Active
SOLID (YELLOW)
LAN/WAN Link
DARK (OFF)
LAN/WAN Disconnect
Status
(10/100)
FLASHING (YELLOW)
Bypass is Active
SOLID (YELLOW)
100 Mbps
DARK (OFF)
10 Mbps