Riverbed SteelCentral NetExpress 470, Руководство по модернизации и обслуживанию

Страница: 13 / 140

Upgrade and Maintenance Guide 13
R
emoving
and Installing the Chassis Cover R
eplacing xx70, Interceptor 9600, and SteelFusion Core 3500 Components
Before installing the bezel, you must install the rack handles.
2. Push the left end of the bezel toward the appliance until it clicks into place (letter B).
3. Lock the bezel, if needed.
Figure 1-2. Installing the Bezel on 1U and 2U xx70 Appliances
Removing and Installing the Chassis Cover
You need to remove the top cover to add or replace components inside the appliance. This section describes
how to work with the chassis cover on xx70 appliances.
The appliance must be operated with the appliance cover in place to ensure proper cooling.
Removing the Chassis Cover on 1U and 2U Appliances
This section describes how to remove the chassis covers for the 1U and 2U xx70 appliances.
To remove the chassis cover on 1U and 2U appliances
1. Power down the appliance and unplug all peripheral devices and the power cable.