Riverbed SteelCentral AppResponse 2180 Скачать руководство пользователя страница 80

Страница: 80 / 82

80 | Reference: Managing Appliances with BMC

Viewing and modifying settings

•

Audit logs

- Displays audit events for this device (if configured). To configure audit logs, choose

Settings > Log Settings > Advanced Log Settings.

Figure B-8. Audit Logs page

Viewing and modifying settings

You can view and modify these settings on the Settings page:

•

External User Services

- Modify LDAP/Edirectory, Active directory, and RADIUS settings.

•

KVM Mouse Setting

- As administrator, modify the mouse modes: Relative mouse mode, Absolute

mouse mode, and Other mouse mode.

•

Log Settings

- Modify advanced log settings to view all system events and filter entries based on

their classification levels.

•

Media Redirection Settings

- Modify general settings, Vmedia instance settings, and remote session

settings.

•

Network Settings

- Modify network IP settings, network link configuration, DNS configuration, and

sideband interface settings.

•

PAM Order Settings

- Modify the PAM (Pluggable Authentication Modules) order for user

authentication into the BMC.

•

Platform Event Filter

- Modify event filters, alert policies, and LAN destinations.

•

Services

- Modify web, KVM, CD-media, FD-media, and HD-media settings.

•

SMTP Settings

- Modify SMTP settings, including the LAN interface and email ID.

•

SSL Settings

- View the SSL certificate, generate the SSL certificate, and upload the SSL certificate.

•

System Firewall

- View and modify existing firewall settings and add a firewall.

•

User Management

- Configure user management settings.

•

Video Recording

- Configure SDL Settings and JAVA SOL. You must enable Remote Media Support

before you configure video recording settings.

Remotely controlling the appliance

You can launch a remote serial-over-LAN session for the appliance from the Remote Control page.

Содержание SteelCentral AppResponse 2180



















































































Результаты поиска

Содержание SteelCentral AppResponse 2180

Отзывы:

Похожие инструкции для SteelCentral AppResponse 2180

Бренды по названию

Популярные бренды

Riverbed SteelCentral AppResponse 2180, Руководство по модернизации и обслуживанию

Результаты поиска

Содержание SteelCentral AppResponse 2180

Отзывы:

Похожие инструкции для SteelCentral AppResponse 2180

Бренды по названию

Популярные бренды