Riverbed RiOS, Руководство по началу работы

Страница: 17 / 146

G
ETTING
S
TARTED
G
UIDE
17
1
I
NST
A
LLI
NG
TH
E
S
TE
ELHEA
D
A
PPLI
ANCE
CHAPTER 1
Installing the Steelhead Appliance
In This Chapter
This chapter describes how to quickly install and configure the Steelhead appliance in English and other
languages. For detailed information about installing and configuring the Steelhead appliance, see the
Steelhead Appliance Installation and Configuration Guide .
Installing the Steelhead Appliance
This section describes how to quickly install and configure the Steelhead appliance in an in-path
configuration. In an in-path configuration, the Steelhead appliance is in the direct path of the client and
server. For details about additional configuration options, see the
Steelhead Appliance Installation and
Configuration Guide .
1. Getting Started
Read the release notes for the product at http://www.riverbed.com/support . They contain important
information about this release.
‹ Check your packing slip to make sure that you have all the necessary parts.
‹ Make sure you have adequate space on a two or four post 19-inch rack. (The Model 50/100/200/300
does not have to be installed on a rack.)
‹ Make sure that the ambient temperature does not exceed 35º C (95º F).
‹ Make sure you have a standard Phillips screwdriver to install the appliance to a rack.
‹ Gather the necessary information:
‹ Host and domain name, IP address, DNS server, default gateway
‹ Primary interface speed and duplex settings
‹ In-path interface IP address, netmask, and default gateway
‹ In-path LAN and WAN interface speed and duplex settings