138 | Network Card Status Lights for SteelHead GX, xx70, SteelCentral, Interceptor, and SteelFusion Core
Four-Port 1-GbE Fiber SX card
Four-Port 1-GbE Fiber SX card
There are 2 types of Four-Port 1-GbE cards available. Both types can be installed in the 1U SteelHead
3070 and the 2U SteelHead 5070, SteelHead 7070, and Interceptor 9600 appliances.
Type 2 cards are supported on the following software versions:
•
SteelHead versions: 8.6.0, 9.0.0, 9.1.0 and 9.2.0
•
Interceptor versions: 4.5.3, 5.5.0, and 5.0.1
Note:
The physical ports on the NICs are mapped in proximity to the PCI bus edge connector. The port closest to
the edge connector is L0, then W0, L1, followed by W1.
Figure B-5. Four-Port 1-GbE Fiber SX Type 1 card (NIC-1-001G-4SX-BP)
Figure B-6. Four-Port 1-GbE Fiber SX Type 2 card (NIC-1-001G-4SX-BP)
LED
Type 1 definition
Type 2 definition
ACT
Activity = Blinks green
Activity = Blinks yellow
BYP/DSC.
Normal = Off
Disconnect = Yellow
Bypass = Green
Normal = Off
Disconnect = Red
Bypass = Green
LNK
Link = Yellow
Link: Green
No link = Off
Specification
Description
Connectors
Two small form factor (SFF) LC fiber connectors
Cables and operating distance
Multimode fiber = 137 m maximum at 62.5 micrometers cable (half of
theoretical distance of IEEE 802.3 standard)
Port
Description
L0, W0, L1, W1
TX and RX provides access to 1000 Base-SX
Содержание NIC LR
Страница 8: ...8 Contents ...
Страница 16: ...16 Getting Started Troubleshooting ...
Страница 48: ...48 Installing Network Cards in xx80 Appliances Identifying interface names ...
Страница 106: ...106 Installing NICs in SteelHead xx50 Appliances Installing NICs in 3U xx50 appliances and Interceptor 9350 ...