Rittal BC 1007 HS, Руководство пользователя

Страница: 14 / 92

14
3.1.2 Pressure Roller Replacement
Replacement of the pressure rollers can be accomplished quickly.
Note: The pressure plate does not need to be removed to accomplish this task.

Remove the pressure roller shafts. (Older pressure plates have C-clips at each end of
the roller shaft and the newer have a bolt with a nut located at the bottom.)
o
For the machines with
C-clips, remove the
lower C-clip and lift the
shaft up to remove the
pressure roller.
o
For the machines with
a bolt and nut, remove
the bottom nut and lift
the bolt up to remove
the pressure roller.

Install new rollers as the shaft
is lowered back into its normal
position.

Re-install the nut or C-clip that was previously removed.