Rittal 7338.321, Монтаж, установка и эксплуатация

Страница: 9 / 86

● Monitoring System CMC III
– CMC III Processing Unit (part number 7030.000), optional
– CMC III Compact Processing Unit (part number 7030.010), optional
● Depth-variable slide rails (part number 5501.480), optional
1.4 Limitations of liability
All specifications and information provided in this operating instruction have been
compiled in consideration of all applicable standards and regulations as well as the
state of the art. The manufacturer accepts no liability for the following damage:
● Failure to follow this operating instruction
● Failure to follow local provisions and any regulations regarding the maintenance
of fire extinguishing systems
● Operating the system in environmental and usage conditions other than the ones
for which the system has been designed
Ä
Chapter 12 „Technical data”
on page 77
● Use for other than the intended purpose
● Unauthorized technical changes
● Use of components not included in the system’s scope of delivery
● Non-compliance with maintenance intervals
● Non-performance of maintenance
● Maintenance errors due to non-compliance with current maintenance instruc-
tions / current maintenance notes of the manufacturer
● Damage for which a third party is to blame
● Intentional damage/manipulations
● Damage resulting from an unauthorized modification to the system
● Repairs not carried out according to regulations
● Actions that are not in the area of those described in this operating instruction
Use of the system must comply with local regulations, laws and standards. The
owner is responsible for the appropriate selection, intended use and compliance
with all standards, codes and ordinances.
The construction and use of the system described in this operating instruction are
only to be used for the purposes that are shown and described. The manufacturer or
private labeler provides no warranty or guarantee for uses not described in this
specification or for uses that do not comply with legal and local regulations.
Graphs or reports used in this operating instruction are for illustrative purposes only,
are not representative or descriptive of any specific design and can deviate from the
actual version of the system.
The manufacturer or private labeler and its representatives disclaim use of the
depictions, graphs and reports for any purpose other than illustration; any other
application or usage is solely the responsibility of the owner.
General
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US 9